General DescriptionThanks to the single phase power supply with intelligent battery charger (Q.PS-ADB-2405-1), it will be possible to optimise power management. We call “Battery Care” the concept base on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation.
The Real Time Auto-diagnostic system, monitoring battery faults such as, battery Sulfated, elements in short circuit, accidental reverse polarity connection, disconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis LED; during the installation and after sell.
The continuous monitoring of battery efficiency reduces battery damage risk and allows a safe operation in permanent connection. Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel 1).
Before starting with the operations of installation you should consult the manual.
Main Characteristic
¦ Nominal Input Voltage : 115…230 VAC
¦ Outout : 24 VDC / 5 A @ 50 °C also without mains
¦ OUTPUT 1: for connection to the battery
¦ OUTPUT 2: for connection to the load
¦ Suited for the following battery types: Open Lead Acid, Sealed Lead Acid, lead Gel and Ni-Cd (option)
¦ Automatic diagnostic of battery status. Battery Life Test function (Battery Care)
¦ Three charging levels: Boost, Trickle and Recovery
¦ Protected against short circuit, Over Load and inverted polarity
¦ Signaling: replace battery, low battery, mains or buffering
? Signal output (contact free) for discharged or damaged battery
? Signal output (contact free) for mains or Back-UP
¦ Protection degree IP20
¦ DIN rail; Space saving